Oh, Make Me Over: A Mid-Century Entryway Table Makeover For Fall

A Mid-Century Entryway Table Makeover For Fall

I picked up a little entryway table a while back for the big fruit and veggies shoot I did a while back. And always planned to eventually repaint it. I liked the shape, but wasn’t a huge fan of the distressed grey look…doesn’t really fit the mid-century inspired shape.

From the start, I knew exactly what I wanted to do with it (the color combo, the type of hardware I was looking for, etc) – which I have to admit doesn’t happen all that often. I do a whole lot more ‘winging it’ than I probably care to these days. But for this one, I knew what I wanted it to be.

And after mixing paint colors to get the exact matches I was picturing, it all came together in what is officially my favorite furniture makeover to date.

Before and after entryway table makeover for fall

A Mid-Century Entryway Table Makeover For Fall

How to makeover a mid-century entryway table


I did some light sanding first, just to prep the surface for paint really well, and wiped off any debris with a dry cloth. Then, I removed the drawers and removed the hardware from the drawers.

And then I started mixing colors. I have A LOT of paint at the studio, but we’ve used all the colors I have for the most part on one thing or another already. So instead of going out and buying more paint, I decided to mix my own. Which actually was one of my favorite things to do when I was still painting regularly. It’s probably also why I care so much about color palettes these days.

Anyway, after mixing 3 or 4 interior paint colors for the mauve color and 4 or 5 for the emerald green color, I was ready to start painting. It might be hard to tell that I mixed my own colors for this project, based on the one and only photo we got of the mixing, but I promise I did. 🙂 I used an old paint swatch as a guide for the colors I wanted to mix, and it only took a few minutes to figure out.

Mixing paints for custom paint colors

Tips for mixing your own paint colors… 1) Make sure all of the paint finishes are the same (all the paints are flat, or all eggshell, etc). 2) Make more than what you think you’ll need because the chances of you getting an exact match again if you need just a tiny bit more are very slim. *That also means you may need to mix your paint in an airtight container (or pour it into later), so that it doesn’t dry out in between coats.

Use a roller for any flat areas to avoid brushstrokes and a brush for any areas that aren’t flat or are hard to get to with a roller (i.e. legs). Wait for the paint to dry, then apply a second coat if necessary. Sand in between coat if necessary.

Once dry, add new hardware to drawers, if desired. I went with two larkin bin pulls from Rejuvenation in aged brass (they’re on sale right now!). Put the drawers back in and you’re done.

Entryway Table Makeover For Fall with Unique Color Combo

Gold hardware

Before and After: A Mid-Century Entryway Table Makeover For Fall

Entryway Table Makeover For Fall

Photography Amelia Tatnall Lawrence
Styling Brittni Mehlhoff

What do you think? Are you a fan of how this one turned out? What do you think of the color combo?

23 comments | Click here to reply

[…] go this route whenever I can… remember a while back, I did a mid-century entryway furniture makeover with paint (and new hardware). But another option you may have not considered before is painting […]

Total Hack: 8 Furniture Hacks for Revamping What You Already Have (On a Tight Budget) - Paper and Stitch

Hi Melissa. I got it at Home Goods locally in Atlanta. Unfortunately, I don’t have any suggestions for Houston places to go scouting. Wish I did. 🙁


HI Donna. The light is a DIY project actually. Here’s the link: https://www.papernstitchblog.com/2016/08/02/ikea-hack-concrete-table-lamp/

Leave a reply