Make This: Drilled Natural Stone Jewelry Tutorial

Guest post tutorial by Jenny Hoople of Authentic Arts.

Want to learn how to drill holes in beach stones? Well, I’ve got good news for you: it’s pretty easy and I’d love to tell you how it’s done.

I’ve been making this natural stone jewelry for several months with pre-drilled pebbles that I purchased from fellow Etsy artisans. It took a little bit of internet research and guessing to figure out the best way to go about drilling my own, indigenous Wisconsin stones. Some sites said one thing, some said another. I took the best advice from several different sources and did some experimenting and found that drilling my own, small river rocks is not only possible, but pretty easy! I’ve gotten a lot of questions from people asking how to drill their own stones and I’d be more than happy to share with all of you.

Choosing the Right Stone for Drilling

Almost any stone that you find CAN be drilled, but I really recommend starting with softer sedimentary rocks (sandstone, mudstone, limestone, etc). If a pebble you find on the beach isn’t rounded like the other ones around it, that’s a good clue that it’s a harder igneous or metamorphic rock and would take a long long time to drill. Other ways to tell if a rock is too hard to drill is by checking whether you can see crystals in the stone or whether the stone is shiny or glossy like quartz (ah, those magical wishing stones of my childhood!) Sedimentary rocks will be much easier to drill, so start with those. But, don’t worry if you can’t tell what kind of rock it is. If it takes significantly longer to drill than the other pebbles, it’s probably igneous or metamorphic.

Equipment You Need to Drill Your Own Beach Stones

1. High speed rotary tool – (ie. a Dremel. I got the Dremel 4000, high performance, I figure that since drilling stone is heavy duty work, it’s a good idea to have a heavy duty tool!)

2. Hollow, diamond-tipped coring bits – These are much faster and effective for drilling holes in pebbles than a solid drill bit. There’s also less chance that you’ll break the stone when drilling and it’s much much faster! Not only do solid drill bits drill more slowly, you’d need to drill a small hole and then change to an ever larger bit until you widened the hole to the diameter that you wanted. Ridiculous! For drilling holes in small beach pebbles to use in jewelry, a 2.5mm diameter hollow coring bit works well. The bits they sell that are officially for Dremels are way too expensive, I highly recommend getting your bits from Rio Grande Jewelry Supply. They have nice packs of 5 for $14 as opposed to one official Dremel bit for more than $20! You’ll be using all 5 of those bits eventually as they do wear out relatively quickly.

3. Dremel Collet Nut – The Dremel rotary tool comes with a Collet Nut (that’s the thing that holds the drill bit in place) but the 2.5mm coring bit is a different size, so you’ll need a Collet Nut that’s the right diameter. I bought the set of Collet Nuts they had right there at the hardware store and used the one that the coring bit fit into! (The other ones in the set will come in handy for all the other projects I dream up to use this Dremel for. It can do so many things, my next experiment will be engraving poems on stones!!)

4. Small Plastic Container – This is to hold a little water so you can drill your beach stone under water. Drilling underwater cools off the bit and lubricates everything which will make the drilling go faster, keep your stone from heating up and keep those little diamond crumbs from getting ground off of the drill bit too quickly. I like to use the little plastic container that my lunch meat came in (cleaned out and sans lunch meat, of course!)

5. Little Piece of Wood – Like a shim or whatever, to have under your pebble so that you don’t drill through the bottom of your water container!

6. Goggles – Please always wear goggles when drilling! I always wear them even though I’ve got glasses. Real danger is minimal, it’s not like there are shards of rock shooting out all over the place, but it’d be a shame to lose your eyesight over some natural beach stone jewelry! Better safe than sorry!!

7. Rocks – Yes, don’t forget your beach stones, river rocks or what have you! Small (~1″) pebbles are ideal. It’s easier to make necklaces like my Rock Collection Necklaces when the stones are small and thin (~1/4″ thick). That way they lay next to each other better.

Lets Start Drilling!

1. Put on your goggles.

2. Firmly hold your beach stone on top of the piece of wood and just under the water.

3. Turn on the Rotary Tool with your other hand and hold it perpendicular to the pebble. – Please be careful when working with the Rotary Tool around water! Don’t get any part of the tool wet that’s not absolutely necessary and don’t grasp the tool with wet hands.

4. Begin Drilling. – Let the weight of the tool do the drilling for you. Be sure to keep lifting the drill up and down. (This lets cooling water get into the hole and lets the sediment from the stone to flow out.) The water will get cloudy, that’s ok, just keep drilling.

5. You’ll feel when it breaks through to the other side. You’re done! – With these small beach stones, I’ve found that drilling one takes about 2-3 minutes. (I’m sure it’ll be faster when I’m not so new at it!)

The only way that I alter these unique stones other than drilling a hole in them is to rub them with my hands after I’ve just put on some unscented Eucerin lotion (after the stones are dry, of course!). That helps to condition the stones so that the natural oils from your skin won’t leave uneven dark spots and enriches the natural color of the stone so they aren’t all dusty looking. After the lotion gets a chance to be absorbed by the stone, any excess should be wiped off with a clean, dry towel so you don’t have to worry about whether it will mark your clothing with an oil spot!

Now get out there and start making some fabulous beach stone creations! All you need are a couple of basic jewelry supplies to complete the project once you have the stones drilled. Very easy.

About Jenny: Jenny Hoople makes natural stone jewelry and beaded gemstone jewelry that is as natural, colorful and authentic as the people it’s given to. She lives near Madison, Wisconsin with her little Mexican husband and memories of their wonderful bunny companion (who crossed over the rainbow bridge after 7 happy, bun-filled years). She’s passionate about color combinations, the handmade movement and living closer to the “real business of life”. Follow her on Facebook and Twitter @Jennyhoople.

Thank you so much Jenny for sharing your project!

For more ideas for quick and easy projects, click here to visit the craft tutorials and diy page filled with more than 60 diys. If you like this project, please help us spread the word by using the twitter and facebook buttons below. Thank you so much.

82 comments | Click here to reply

Great how-to. Want to remind everyone to get good quality masonry bits for your drill. The cuts go faster and the bits last longer.

Raymond

This is so nice. when i was young i used to pick up stones during summer, Thank God summers just a few weeks to go, I can go to the beach, im going to collect all those lovely stones and make my own necklace.

By the way are those tools available in hardware’s in a set? thanks mucha!

Love lots & hoping for updates.

January Gemorie

Thank you! I have just discovered the incredible beauty in rock and stone. I appreciate your concise, easy directions! You have given me the confidence to go ahead and jump right in! Thank you again!

Karen

Jenny you are Awesome!

I am very, very excited to find out all this wonderful information in a snap!

I was at 2 different craft stores today for a total of 1 1/2 hours: Joanns and Michaels to look for any direction on how to make jewelry out of the beach stones I picked up off the Cape May beaches last year and got nowhere……I was disappointed until now!

I asked for a rock tumbler for Christmas and got one!
The stones are beautiful!
~Now to create something from my heart to give to others as gifts.

Jenny, I just have two questions:

1) How do you start the hole with the “Coring bit” since it does not have a pointed tip?

2) How do you hold the stones in place to drill a hole in the stone and not you fingers?

Thank You kindly & God Bless!

Robin*Lee

Hi Jenny,

I just used your technique to put together some beautiful jewelry as a Christmas present for my lady friend. Thank you so much for the help!

I would like to comment that while the diamond coring bit is essential, I was able to use a regular utility drill as opposed to a dremmel and had great results! Thanks again!

Hubert Fitzwilliam

Great,
Just wondering how you held the stone in position to keep it from moving while drilling

Sirius

Hi:
Great tutorial! I need to know what size drill bit and which model of dremmel you are using, if you don’t mind.
Thanks!

Meg

Thanks. I’ll bookmark this and get myself a Dremel one day! I love beack stones and have a ton!

Doda

Great of you to …. SHARE, your also GOOD with explaining directions !!!

Gail

Hi Jenny! I have been scouring the web for about two hours now, looking for information on what size Dremel to buy to drill stones and beach glass and how to do it. You have, by far, had the best and most detailed information!
My question would be, do you think the Dremel 300 would work on the stone as well? It seems to have the same qualities as the 4000, but perhaps a bit smaller. I am worried that the 4000 will be too bulky or hard to use. Do you find that to be the case?
Thank you!

Michelle

Thank you for sharing this ! I found it very helpful and appreciate your time~ 🙂

Bridgette Mitchell

Thanks Lindsey! Yes, I think it would work really well on shells!

Jenny Hoople

Do you think this would work on shells (like from the beach 🙂 ?
great tutorial!
Lindsey

Lindsey

Wow, Steve 🙂 10 pieces of jewelry? That’s awesome! You guys rock 😉

Jenny Hoople

Thanks for the great tutorial! We got back from a great vacation in Maine with a whole bag of rocks that I wasn’t sure what we were going to do with them. After reading your tips on Friday, my son and I made about 10 pieces of jewelry this weekend and I can’t wait to make more and try some different things. Thanks again! Steve

Steve

Hi Jenny, Thanks so much for share this awesome info with us. I have always wanted to learn how to do this ever since I was little, my aunt use to make necklaces like your and I have always want to know how my aunt did it. Since she not here on earth. Thanks again for sharing. BLESS IT BE ””

Yasmin Mohamed,

Thanks for sharing, always wanted to make my own.

Stuart jannetts

Hello, does this work for drilling holes in 12mm beads?

Nesha

[…] found this blog on how to make holes. They are showing a hollow “core bit”. That looks […]

Drilling in small stones « Mambohead

Thank you all again 🙂

Cathy – I don’t think a regular drill bit will work. A regular drill would be so slow and the bit wouldn’t be hard enough to drill the stone. Diamonds really are a girl’s best friend here.

Jenny Hoople
Leave a reply