Make This: Drilled Natural Stone Jewelry Tutorial

Guest post tutorial by Jenny Hoople of Authentic Arts.

Want to learn how to drill holes in beach stones? Well, I’ve got good news for you: it’s pretty easy and I’d love to tell you how it’s done.

I’ve been making this natural stone jewelry for several months with pre-drilled pebbles that I purchased from fellow Etsy artisans. It took a little bit of internet research and guessing to figure out the best way to go about drilling my own, indigenous Wisconsin stones. Some sites said one thing, some said another. I took the best advice from several different sources and did some experimenting and found that drilling my own, small river rocks is not only possible, but pretty easy! I’ve gotten a lot of questions from people asking how to drill their own stones and I’d be more than happy to share with all of you.

Choosing the Right Stone for Drilling

Almost any stone that you find CAN be drilled, but I really recommend starting with softer sedimentary rocks (sandstone, mudstone, limestone, etc). If a pebble you find on the beach isn’t rounded like the other ones around it, that’s a good clue that it’s a harder igneous or metamorphic rock and would take a long long time to drill. Other ways to tell if a rock is too hard to drill is by checking whether you can see crystals in the stone or whether the stone is shiny or glossy like quartz (ah, those magical wishing stones of my childhood!) Sedimentary rocks will be much easier to drill, so start with those. But, don’t worry if you can’t tell what kind of rock it is. If it takes significantly longer to drill than the other pebbles, it’s probably igneous or metamorphic.

Equipment You Need to Drill Your Own Beach Stones

1. High speed rotary tool – (ie. a Dremel. I got the Dremel 4000, high performance, I figure that since drilling stone is heavy duty work, it’s a good idea to have a heavy duty tool!)

2. Hollow, diamond-tipped coring bits – These are much faster and effective for drilling holes in pebbles than a solid drill bit. There’s also less chance that you’ll break the stone when drilling and it’s much much faster! Not only do solid drill bits drill more slowly, you’d need to drill a small hole and then change to an ever larger bit until you widened the hole to the diameter that you wanted. Ridiculous! For drilling holes in small beach pebbles to use in jewelry, a 2.5mm diameter hollow coring bit works well. The bits they sell that are officially for Dremels are way too expensive, I highly recommend getting your bits from Rio Grande Jewelry Supply. They have nice packs of 5 for $14 as opposed to one official Dremel bit for more than $20! You’ll be using all 5 of those bits eventually as they do wear out relatively quickly.

3. Dremel Collet Nut – The Dremel rotary tool comes with a Collet Nut (that’s the thing that holds the drill bit in place) but the 2.5mm coring bit is a different size, so you’ll need a Collet Nut that’s the right diameter. I bought the set of Collet Nuts they had right there at the hardware store and used the one that the coring bit fit into! (The other ones in the set will come in handy for all the other projects I dream up to use this Dremel for. It can do so many things, my next experiment will be engraving poems on stones!!)

4. Small Plastic Container – This is to hold a little water so you can drill your beach stone under water. Drilling underwater cools off the bit and lubricates everything which will make the drilling go faster, keep your stone from heating up and keep those little diamond crumbs from getting ground off of the drill bit too quickly. I like to use the little plastic container that my lunch meat came in (cleaned out and sans lunch meat, of course!)

5. Little Piece of Wood – Like a shim or whatever, to have under your pebble so that you don’t drill through the bottom of your water container!

6. Goggles – Please always wear goggles when drilling! I always wear them even though I’ve got glasses. Real danger is minimal, it’s not like there are shards of rock shooting out all over the place, but it’d be a shame to lose your eyesight over some natural beach stone jewelry! Better safe than sorry!!

7. Rocks – Yes, don’t forget your beach stones, river rocks or what have you! Small (~1″) pebbles are ideal. It’s easier to make necklaces like my Rock Collection Necklaces when the stones are small and thin (~1/4″ thick). That way they lay next to each other better.

Lets Start Drilling!

1. Put on your goggles.

2. Firmly hold your beach stone on top of the piece of wood and just under the water.

3. Turn on the Rotary Tool with your other hand and hold it perpendicular to the pebble. – Please be careful when working with the Rotary Tool around water! Don’t get any part of the tool wet that’s not absolutely necessary and don’t grasp the tool with wet hands.

4. Begin Drilling. – Let the weight of the tool do the drilling for you. Be sure to keep lifting the drill up and down. (This lets cooling water get into the hole and lets the sediment from the stone to flow out.) The water will get cloudy, that’s ok, just keep drilling.

5. You’ll feel when it breaks through to the other side. You’re done! – With these small beach stones, I’ve found that drilling one takes about 2-3 minutes. (I’m sure it’ll be faster when I’m not so new at it!)

The only way that I alter these unique stones other than drilling a hole in them is to rub them with my hands after I’ve just put on some unscented Eucerin lotion (after the stones are dry, of course!). That helps to condition the stones so that the natural oils from your skin won’t leave uneven dark spots and enriches the natural color of the stone so they aren’t all dusty looking. After the lotion gets a chance to be absorbed by the stone, any excess should be wiped off with a clean, dry towel so you don’t have to worry about whether it will mark your clothing with an oil spot!

Now get out there and start making some fabulous beach stone creations! All you need are a couple of basic jewelry supplies to complete the project once you have the stones drilled. Very easy.

About Jenny: Jenny Hoople makes natural stone jewelry and beaded gemstone jewelry that is as natural, colorful and authentic as the people it’s given to. She lives near Madison, Wisconsin with her little Mexican husband and memories of their wonderful bunny companion (who crossed over the rainbow bridge after 7 happy, bun-filled years). She’s passionate about color combinations, the handmade movement and living closer to the “real business of life”. Follow her on Facebook and Twitter @Jennyhoople.

Thank you so much Jenny for sharing your project!

For more ideas for quick and easy projects, click here to visit the craft tutorials and diy page filled with more than 60 diys. If you like this project, please help us spread the word by using the twitter and facebook buttons below. Thank you so much.

82 comments | Click here to reply

[…] Drilled Natural Stone Jewelry from Paper & Stitch […]

10 Ways to Make Your Own Beads • Vicki O'Dell

Oh my gosh! I love this tutorial! Finally something different! Thank you! Kind regards,


I love the look of your blog and I always admire anyone who can create something on Etsy, which is a great marketplace. I would have love to have seen more photos of your pieces possibly with links to them on Etsy.


Can you use a solid bit rather than a hollow tipped one?


Amazing tips i will try to drill natural stone, but i use first some cheap stone.


I found your instructions extremely easy to follow and very informative. Thank you for sharing.


Hey love this! I’m excited to start.. I have this addiction to collect round flat rocks.. now I can do something with them 🙂


[…] I found this tutorial on how to drill natural stones from Jenny Hoople to be great. This is a woman who does a lot of great river stone jewelry with her company Authentic Arts. Working artists like Jenny are the best to learn from! […]

Rock Jewelry Inspiration + Giveaway | Nunn Design

This is great! I didn’t know you can use the dremel in what way!


Gorgeous pieces! Can’t wait to try my hand at it. Thanks for the relative information.


You are FABULOUS! Thank you so much for this advice,however, I need to find out how to drill into large crystal quartz stones to make several crystal pendants, earrings etc. I do have a Dremel I got for my birthday in Dec. I do not want to shatter it. PLEASE ADVISE ASAP. Thanks!


Can someone tell me if drilling thru beach glass would be much more complicated than stone? Or would they tend to break faster or easier than stones? I just love the idea of making homemade jewelry, great gift idea! Thanks! 🙂


Wow! What a technique! I just used this successfully on the stones I found recently in Carpinteria. This has really opened my eyes to the world of making my own jewelry. Thank you!!!


[…] Drilled Natural Stone Jewelry from Paper & Stitch […]

10 Ways to Make Your Own Beads | Vicki O'Dell... The Creative GoddessVicki O'Dell... The Creative Goddess

I just successfully drilled a hole on my first natural stone my husband picked up on our backyard ,what I did I applied clear nail polish all over,Im just so excited because it became a bit glossy not much.just the way I like it.I made a bail for it and hung in 22″chain,which I’m ready to wear it tomorrow 😉 thanks you gave me an inspiration,it just a start believe me.,,,,


Thank you . After several ruined and wrong bits. After several cracked rocks. I finally thought to seek advice online and stumbled upon your VERY helpful site. Love it and keep up the great work.

Erica Norton

Hi, do you know what size collets you have? I have drill bits size 1, 1.5, 2 and 2.5 mm and I’m having trouble finding collets to fit.


bits from rio grande are not working..thinking we have the wrong rock…how do we find the correct sedimentary stones to work with?
what is your source?




With your beach stones do you polish or tumble them or use them as you find them on the beach? I found a good collection while out kayaking and have been searching online about polishing without a tumbler and how to drill the stones for jewelry (that’s how i came across your how-to!) I live in Iowa so i’m sure that i have some similar stones to what you’re working with. I appreciate any advice!

Leave a reply