Color Me Geometric: The Makings of a Colorful (DIY) Studio Mural

  |   6 comments

A colorful DIY mural in an entryway

After months in the new space, I’m slowly but surely getting around to larger studio projects that I’ve been wanting to tackle since we moved in. Finally, right?! My plan from the get-go was to keep everything light and white, for shooting. But after being here for a little while, I’ve realized that there are a few key areas that are calling out for pops of color.

So, I’ve partnered with 3M and their line of ScotchBlue™Pre-Taped Painter’s Plastic to share a few of those color pop projects over the coming months and today is the first installment of the three.

I’ve been really into the pattern trend these last few months and with murals popping up in my feed more and more too, I thought a colorfully painted mural in a geometric(ish) pattern would be perfect for the upstairs half wall. But it would also be a cool DIY idea for an entryway, hallway, or landing. No half wall required!

The painting process and overall design was partially planned out and partially on-the-fly, AND (more importantly) 100% doable for anyone wielding a paintbrush with a little bit of time on their hands. Here’s what you’ll need to make a mural like mine…

Supplies for creating a colorful, geometric mural

Materials

Note: Follow all ScotchBlue™ Painter’s Plastic package instructions for proper surface cleaning and prep, adhesion and removal.

Clean the surface

Instructions

1. Start by cleaning baseboards with a damp cloth and making sure your walls are free of debris. Remove any outlet plates on the wall with a screwdriver as well.

Scotchblue

2. Once the wall and baseboards are completely dry and free of debris, apply ScotchBlue™Pre-Taped Painter’s Plastic (available in 2 sizes in a loaded dispenser like mine) the same way to apply regular painter’s tape. Get as close to the edge where the baseboards meet the wall as possible and press down firmly over the tapes surface with your fingers (or a putty knife) to make sure the tape is secure. Cut the end of the Painter’s Plastic with the attached blade and unfold the Painter’s Plastic to cover baseboards and flooring.

Note: I love this product so much, I used the Painter’s Plastic on the top on the wall as well, where there is a little overhang. The fact that I didn’t have to buy a drop cloth to protect my floors, baseboards, or top molding was pretty cool in my book. Paint can get expensive, so the more money I can save on projects like this one, the better.

For more tips and tricks on masking, etc visit the “How to Mask for Painting” section on ScotchBlue.com.

A colorful DIY mural in an entryway

A colorful DIY mural in an entryway

3. Next, paint the wall, with a paint roller and paint brush (for the trim areas) in a solid color. Apply a second coat of paint, if necessary according to the wait time suggested on the paint you’re using. Then wait 24 hours for the walls to dry completely before moving onto the next step.

A colorful DIY mural in an entryway

4. Next, using ScotchBlue™ Delicate Surfaces Painter’s Tape (which is for delicate surfaces, like freshly painted walls, and comes in a variety of widths), start taping off large geometric shapes in a random allover pattern. When applying the tape, press firmly over the tapes surface with your fingers (or a putty knife on smooth walls, if you prefer) to make sure the tape is secure.

Note: Be sure to step back and look at how the shapes are looking together as a whole every so often to make sure you like what you see. If you need to make changes, you can easily remove the tape and start again. Much easier to get it right during this step than to have to repaint later.

A colorful DIY mural in an entryway

5. Once you are satisfied with the basic pattern, use a roller and/or brush to paint inside the tape lines with the second paint color. Wait for paint to dry before adding a second coat if necessary.

A colorful DIY mural in an entryway

6. While you’re waiting for the paint to dry from step 5, I decided to use some heavy paper to create some smaller stencils to fill in additional areas that looked too plain. This step is completely optional, but if you want some organic shapes in your mural as well, this would be the time. I traced household objects for circles, half circles, etc and drew a couple of additional shapes freehand. Then, cut them out and traced them onto the wall with a pencil. And then painted them with a paint brush.

Note: I also found it helpful to tape the shapes to the wall before tracing them, to make sure I liked the placement before painting.

A colorful DIY mural in an entryway

7. Once all the wall paint has completely dried, it’s time to remove the tape and painter’s plastic. Starting with ScotchBlue Painter’s Plastic, slowly remove tape at a 45° angle and pull the tape back onto itself for best results. This will give you a nice crisp line.

A colorful DIY mural in an entryway

8. Then remove ScotchBlue™Pre-Taped Painter’s Plastic, the same way you removed the Painter’s Tape in step 7. And if you don’t get around to this part right away, it’s okay! This product can be removed cleanly up to 14 days after painting, so you’re good to go.

Pink and yellow. A colorful DIY mural in an entryway.

A pink and yellow geometric mural. Click through for the step by step process.

A pink and yellow geometric mural. Click through for the step by step process.

A pink and yellow geometric mural. Click through for the step by step process.

Photography Amelia Tatnall + Brittni Mehlhoff

If you were painting a mural like this one, in your home, what colors would you use?

This post is in partnership with 3M. All opinions are my own and additional products used in the project were selected by me. Thanks for supporting the brands that help keep Paper & Stitch running.

6 comments | Click here to reply

This looks so cool, I love the colours!
https://www.makeandmess.com/
Michelle recently posted..Palm Leaf Pouch

Michelle | August 11th, 2016 at 4:32 am

Thanks Michelle. 🙂

Brittni | August 11th, 2016 at 10:30 am

Wow! Your studio looks amazing! I love the fun colors and patterns!

http://www.thebeautydojo.com

Andrea Handojo | August 11th, 2016 at 1:14 pm

Thanks so much Andrea. It’s a work in progress, but it’s coming along.

Brittni | August 11th, 2016 at 2:10 pm

[…] wird gezeigt, wie man seine Wände stylish und farbenprächtig aufpoliert. Den Artikel findet ihr hier. So könnte es dann bald also auch bei euch […]

Lese-Links zum Wochenende #27 - Lunamag.de | August 12th, 2016 at 9:34 am

[…] –  Boring beige need not be your entryway’s fate – not with this cheerful mural DIY inspo. […]

Creative Weekend Links | August 13th, 2016 at 7:26 am
Leave a reply

CommentLuv badge